FM Systems .:. Shure UA845 .:. Leading the Way in Sound Reinforcement

UA845 UHF antennae distribution


	Designed for large UHF wireless systems
	Allows up to four wireless receivers
	CASCADE port connects a fifth receiver
	Compatible with receivers within frequency
	Powers up to five U4 receivers
	Low noise and intermodulation distortion
	Amplifies signals to the receivers

Width

Height

Depth

Weight

--------------------- Description ---------------------

The Shure UA845 is an amplified, UHF antenna distribution system designed to expand a wireless microphone system by splitting one pair of antennas to multiple Shure U4 wireless receivers. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845 allows up to four receivers to use the same antennas. CASCADE connectors allows connections to a fifth receiver or a second UA845. There are also power connectors for powering Shure UHF and UC Wireless systems.

--------------------- Specifications ---------------------

RF Carrier Frequency Range:	782 to 806 MHz
Distributed Output Level (Gain):	3.5 dB typical, 2.0 dB to 5.0 dB from antenna input
Distributed Cascade Output Level (Gain):	0.5 dB typical, –1.0 dB to 2.0 dB from antenna input
Output Connector Isolation:	Greater than 25 dB
Third Order Intercept Point (3 OIP):	Typical 24 dBm
Input/Output AC Line Voltage:	100 to 240 VAC, 50/60 Hz, unswitched
DC Output Voltage:	12 VDC, 4 connectors
Impedance:	50 ohm
Input/Output Antenna Connector Type:	BNC-type
AC Power Consumption:	15 W per unit typical. When used with 4 UC4’s, 55 W max.

--------------------- More Information ---------------------

Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader

All information/images may vary from our actual inventory and are subject to change without notice.

	Contact \| Equipment \| Events \| Portfolio \| Site Map