|
|
|
| |
|
|
|
|
|
|
 |
 | | | I-T4000 1250 watts per ch @ 8 ohm | |  |  |  | | |  | Unmatched power in a 2U lightweight chassis |
| Global power supply with Power Factor Correction |
| Onboard DSP |
| LCD control screen allows easy setup, diagnostics, and DSP presets for various loudspeakers |
| Pushbutton DSP presets |
| Highest output voltage in the industry |
| |
|  |  | |  |  | | | | | | | --------------------- Description --------------------- | The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound and installed sound applications. Onboard DSP provides a wide array of signal processing, greatly reducing the need for rack components and rack wiring. Onboard DSP features 24-bit, 96 kHz A/D and D/A converters. Pushbutton DSP presets simplify the setup for various loudspeaker arrays. The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight. I-Tech amplifiers have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation patented Class-I (BCAŽ) circuitry couples power efficiently to the load and allows low AC current drain. A front-panel control screen shows advanced diagnostics and status information. | | | | |
--------------------- Specifications --------------------- | | | Power
(Stereo 20Hz to 20kHz, <0.35% true THD): | 1250W (8 ohm), 2000W (4 ohm), 1800W (2 ohm) |
Power
(Bridged 20Hz to 20kHz, <0.35% true THD): | 4000W (8 ohm), 3600W (4 ohm) |
| Maximum Output Voltage: | 200V peak |
Frequency Response
(at 1W, 20 Hz - 20 kHz): | 0.25dB |
| Protection Circuitry: | ACL, IGM, AutoRamp, short-circuit, DC voltage, turn-on/off
transient, current in-rush, sub/ultrasonic input |
| Input Sensitivity: | .775V (rated power at 8 ohm) |
| Input Impedance: | >20k ohm/10kohm (balanced/unbalanced) |
Signal to Noise Ratio
below rated 8-ohm power, A-weighted: | >105 dB |
Damping Factor
(20 Hz to 100 Hz): | > 5000 |
| Input Connectors: | A 3-pin female XLR connector for each channel (Analog)
and A 3-pin female XLR connector that accepts a digital
signal in the AES/EBU format (Digital) |
| Output Connectors: | Two high-current, 50A Neutrik Speakon NL4MLP, one per
channel. Two pairs of high-current, 60A color-coded 5-way
binding posts. Two male XLR passive analog loop through.
XLR active/re-clocked AES/EBU digital loop through |
| Cooling: | Dual-zone, microprocessor controlled, continuously
variable speed fans, front-to-back airflow |
| | | |
| --------------------- More Information --------------------- |
 Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader |
| | |
|
| All information/images may vary from our actual inventory and are subject to change without notice. |
| |
|
![Click to view a larger image](javascript:Zoom("images/eq_i-t4000.jpg", 600, 162))
