|
|
|
| |
|
|
|
|
|
|
 |  |  | | Beta91 Half-cardioid surface mount condenser |  |  |  |  |  |  |  | For kick drums and other instruments |  | Wide dynamic range |  | No external mounting hardware required |  | Detachable cable for easy storage |  | Shure quality, ruggedness, and reliability |  |  |
|  |  | |  |  |  | | | | | | --------------------- Description --------------------- | The Shure Beta91 microphone is designed specifically for surface-mounted applications. It is a professional-quality permanently-biased condenser microphone with a half-cardioid directional pattern (cardioid in the hemi-sphere above the mounting surface.) Because of its half-cardioid polar pattern, the Beta91 surface-mounted microphone discriminates against sounds originating from the rear, suiting the Beta91 for conditions where an omnidirectional pattern makes other surface-mounted microphones impractical. | | | | | --------------------- Specifications --------------------- | | | | Type: | Condenser (electret bias) | | Frequency Response: | 20 Hz to 20 kHz | | Polar Pattern: | Half-cardioid (cardioid in hemisphere above mounting surface), uniform with frequency, symmetrical around axis | | Impedance: | 150 ohm (actual) | | Sensitivity (at 1 kHz): | Open Circuit Voltage -59.0 dBV/Pa (1.1 mV); 1 Pascal = 94 dB SPL | | Phasing: | Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 | | Connector: | TA3M 3-pin mini male XLR | | Case: | Matte-black, painted, die-cast, zinc-alloy case with matte-black steel grille | | Maximum SPL (at 1 kHz): | 156 dB (20 Hz to 20 kHz, less than 1% THD) | | Phantom Supply Requirement: | 48 VDC +/- 4 VDC, positive pins 2 and 3 |
| | | | | --------------------- More Information --------------------- | Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader |
| | |
|
| All information/images may vary from our actual inventory and are subject to change without notice. |
| |
|