|
|
|
| |
|
|
|
|
|
|
 |  |  | | AE6B Stage monitor |  |  |  |  |  |  |  | Bi-amp, two way electronically coupled |  | Accurate reproduction of voice and music |  | Wide angle pattern |  | 48 dB/octave linear phase crossovers |  | Designed for concert stages, theaters, television stages and club stage foldback |  | Crafted from 100% Finland birch ply |  | Steel rigging hardware |  |  |
|  |  | |  |  |  | | | | | | --------------------- Description --------------------- | The Apogee AE6B low-profile monitors provide extremely high acoustical output. The AE6B has a vertically formatted wedge design with a wide horizontal pattern. This wide angle pattern offers a smooth and flat response both on- and off- axis. This property minimizes coloration of the main sound reinforcement system in applications where many open microphones are located off-axis from the monitor. Driver complement consists of one 12" woofer and one 1" HF compression driver. | | | | | --------------------- Specifications --------------------- | | | | Format: | Bi-amped, two way electronically coupled | | Low Frequency Driver: | One Apogee 12" (305 mm) permanent magnet cone-type | | High Frequency Driver: | One Apogee 1" (25 mm) throat composite diaphragm compression | | Dispersion: | H: 90° x V: 45° | Frequency Response: (1m on axis) | 53 Hz to 17 kHz, +/- 3 dB | Max. SPL: (@ 1m) | 125 dB continuous, 131 dB peak | PTML: (peak transient mechanical limit) | 144 dB | Sensitivity: (1W @ 1m) | LF: 99 dB/100 Hz to 1 kHz; HF: 106 dB/1 kHz to 20 kHz | | Nominal Impedance: | 8 ohm each driver | | Max. Power Handling: | LF: 300 W continuous, 1200 W peak; HF: 150 W continuous, 600 W peak | | Input Connectors: | Neutrik NL4MP Speakon | | Compatible Processors: | A5R, P5PV, P5RVT |
| | | | | --------------------- More Information --------------------- | Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader |
| | |
|
| All information/images may vary from our actual inventory and are subject to change without notice. |
| |
|