Home > Equipment > Rentals > Amplifiers > Crest 8002
 
FM Systems' Contact Information
FM Systems' Equipment
FM Systems' Events
FM Systems' Portfolio
FM Systems' Site Map
 
             
Click here to visit the Crest website
  8002     800 watts per ch @ 8 ohm
PowerLok technology
Dramatically-reduced net weight
High-speed, wide-bandwidth output devices
Twin tunnel cooling with back-to-front flow
Dual, rear-mounted fans
Balanced male and female XLR inputs
Speakon and 5-way binding post outputs
Stereo/parallel/bridged mono modes
Click to view a larger image
Width
Height
Depth
Weight
  
--------------------- Description ---------------------
The 8002 heralds a major advance in amplifier design from Crest Audio. Extreme reliability and hallmark sonic accuracy of the legendary Professional Series is maintained in the same rugged package - but at only half the weight. Such dramatic weight savings are made possible by PowerLok, a radical new power-supply technology that provides significant performance and flexibility advances over conventional designs.
  
--------------------- Specifications ---------------------
 
Power:    
(Stereo 1kHz, <0.02% THD+N)    
    800W (8 ohm), 1400W (4 ohm), 2000W (2 ohm)
Power:    
(Bridged 1kHz, <0.02% THD+N)    
    2800W (8 ohm), 4000W (4 ohm)
Maximum RMS Output Voltage:         92V, each channel
Frequency Response:         20Hz to 20kHz, -3dB @ 135kHz (+0/-0.3dB, 1W/8 ohm)
Protection Circuitry:         ACL, IGM, AutoRamp, High Temp, short-circuit, DC voltage,
    turn-on/off transient, current in-rush, sub/ultrasonic input
Current Draw:         1/8 power, 4 ohm: <7.7A @ 120V
    1/3 power, 4 ohm: <17.3A @ 120V
    at idle: <1.5A @ 120V
Input Impedance:         >20k ohm/10kohm (balanced/unbalanced)
Crosstalk:         >-80dB @ 1kHz below rated power
Class:         H
Input Connectors:         3-pin female XLR (pin 2+/3+ selectable),
    TRS (tip+) (per channel)
Output Connectors:         Speakon connectors and five-way output binding posts
Power Requirement:         50-60Hz
Cooling:         Rear to front via two rear-mounted variable-speed DC fans
  
--------------------- More Information ---------------------
  Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader
  
All information/images may vary from our actual inventory and are subject to change without notice.
 
 
Contact     |     Equipment     |     Events     |     Portfolio     |     Site Map