FM Systems .:. DBX 165A .:. Leading the Way in Sound Reinforcement

165A Compressor/limiter


	Compression ratio continuously variable
	Can determine program material dynamics
	Ultra fast or slower RMS-detecting limiter
	PeakStop circuit prevents unwanted peaks
	Separate detector input
	Matched RMS detectors
	Switchable analog RMS meter
	Active balanced input

Width

Height

Depth

Weight

--------------------- Description ---------------------

The DBX 165A OverEasy compressor/limiter gives the operator complete control of the compression and limiting characteristics. The choice of automatic or manually set attack and release rates provides the ultimate in flexibility. The control design and layout reflect the concern of the sophisticated user for repeatable, precise settings. The 165A is a classic design that has extensive applications for delicate situations where the compressor/ limiter must be very unobtrusive in use.

--------------------- Specifications ---------------------

Frequency Response:	20 Hz to 20 kHz +/- 0.5 dB
THD:	0.2%, maximum compression, 1 kHz, 0 dBV
Noise:	- 90 dBV
Maximum Input:	+ 24 dBV
Maximum Output:	+ 23 dBV
Input Impedance:	22k ohm differential, 11k ohm unbalanced
Output Impedance:	Low single ended, for driving 600 ohm or greater
Gain:	- 20 to + 20 dB
Threshold Range:	- 40 to + 20 dBV (Compressor), - 2 to + 24 dBV (PeakStop)
Attack Times:	Auto: 15 ms for 10 dB, 5 ms for 20 db, 3ms for 30dB; Manual: variable from 2.5 us to 1 ms per dB
Release Times:	Auto: 8 ms for 1 dB, 80 ms for 10 dB, 400 ms for 50 dB; (125 dB/s rate); Manual: variable from 250 us to 100 ms per dB
Maximum Compression:	Greater than 60 dB
Power Requirements:	90 to 130 V (117 V model), 50 to 60 Hz; 6 W

--------------------- More Information ---------------------

Click HERE to download the manufacturer's pdf cutsheet .:. requires Adobe Acrobat Reader

All information/images may vary from our actual inventory and are subject to change without notice.

	Contact \| Equipment \| Events \| Portfolio \| Site Map